10 Steps for a DIY Manicure | Mineral Fusion (2024)

Search results for '{{query}}'

Unfortunately there were no items matching your request.
Don’t give up –check the spelling, or try less specific search terms.

Fusionista

10 Steps for a DIY Manicure | Mineral Fusion (1)

10 Steps for a DIY Manicure | Mineral Fusion (2)

Whether to save time or money, a DIY at-home manicure can be a fun practice in self-care.

Step 1.ApplyNail Polish Removerto start with a clean slate. We recommend anacetone-freenailpolish remover which easily removes even the darkest shades of nail polish without drying the nail.

Step2.Cleanse. Clean your hands and moisturize. If having a mani day with friends, take turns massaging each other's arms.

Step3. Clip.Whether you have short or long nails, it's always great to start by clipping your nails. For short nails, clip to just below the top of your finger keeping them short, but still looking feminine.

Step4. File.To achieve the desired shape, use a nail file to shape your nails. Tip: mirror the curve at the base of your nails.

Step5. Buff.Using a buffer will smooth the surface of your nail and even out ridges.

Step6. Push back the cuticles and applyCuticle Treatment.Let it sit for one minute, andpush back the cuticle.Softening cuticles will eliminate rough spots and dead skin around the nail keeping your manicure looking fresh for longer.

Step7. ApplyBase Coat.This lays the foundation for polish application and it protects the nail from being stained by the polish. Wait 3-5 minutes for it to dry.

Step8. Apply your first coat ofNail Polish.Make sure you only coat one side of the brush to avoid drips. Start in the middle of the nail and work down to the cuticle, then up to the nail tip, then fan the brush to the right and left sides of the nail until it's evenly coated. Our custom, extra thick brush makes this process a breeze!

Step9. Apply your second coat of color.Wait 3-5 minutes.

Step10. ApplyTop Coat.Seal in the color and you're done! Choose from our Top Coat for a classic look,Matte Top Coatfor a fun finish, orGel Top Coatfor a plump, ultra-shiny manicure.Wait 3-5 minutes.

Enjoy your long-lasting, premium manicure!

10 Steps for a DIY Manicure | Mineral Fusion (2024)

FAQs

10 Steps for a DIY Manicure | Mineral Fusion? ›

A manicure is a beauty treatment of the hands. Your nails will be cut, filed, and shaped. You will then have your cuticles pushed back and tidied, and then enjoy a hand massage. The final step will be the painting of the nails with a colour of your choice.

What are the 10 steps in a basic manicure? ›

10 Steps To The Perfect DIY At-Home Manicure
  1. Step 1: Begin With Clean Nails. Using a polish remover is mandatory. ...
  2. Step 2: Shape 'Em. ...
  3. Step 4: Buff Your Hands. ...
  4. Step 5: Push The Cuticles. ...
  5. Step 6: Restore The Moisture. ...
  6. Step 7: It's Time For Base Coat. ...
  7. Step 8: It's Time To Paint! ...
  8. Step 10: Seal It In.

How to do a manicure at home step by step? ›

Get a Perfect At-Home Manicure in 7 Easy Steps
  1. File Your Nails. Make sure they are completely dry (filing wet nails can cause splitting). ...
  2. Soak Your Nails. Apply a rich hand cream. ...
  3. Push Back Your Cuticles. ...
  4. Apply a Basecoat. ...
  5. Brush On Two Coats Of Color. ...
  6. Apply a Top Coat. ...
  7. Clean Up Any Smudges.

What are the manicure procedures? ›

A manicure is a beauty treatment of the hands. Your nails will be cut, filed, and shaped. You will then have your cuticles pushed back and tidied, and then enjoy a hand massage. The final step will be the painting of the nails with a colour of your choice.

What are the steps in a basic manicure procedure quizlet? ›

  1. Sanitize your hands and clients hands.
  2. Remove polish from both hands.
  3. File and shape nails of first hand, then soak.
  4. File and shape nails of second hand.
  5. Remove first hand, dry, place second hand in bowl.
  6. Apply cuticle softener, push back cuticles on first hand.
  7. Clean off nails with nail wipe, repeat on second hand.

What are the 7 steps procedures in nail polish application? ›

7 easy steps
  • 7 easy steps. Step 1 – File and shape nails.
  • Step 2 – Buff Nails.
  • Step 3 – Cuticles. ...
  • Step 4 – Apply the base coat.
  • Step 5 – Apply first coat of polish.
  • Step 6– Apply second coat of polish.
  • Step 7– Apply a quick-drying top coat.
  • Extra Tips.
May 21, 2020

How many steps for a manicure? ›

To do a basic manicure, remove any existing nail polish and soak the fingers in warm, soapy water for a few minutes. Trim and push back the cuticles gently, then file the nails. Finally, paint the nails and apply a clear top coat to lock in the color. Put on some music, grab your nail kit, and let's get started.

How to use z nails? ›

FAST: “Z” Nails are self-nailing and easy to apply with the 85° angle of the nail to the shaft enabling the nails to draw the timbers to each other. Install using a standard carpenter hammer only. DURABLE: Made from 5mm diameter Zinc Galvanised or Grade 304 Stainless steel.

How to make an at-home manicure last? ›

8 tricks to make sure your at-home manicure lasts longer
  1. 1) Wipe your nails down first. ...
  2. 2) File your nails right. ...
  3. 3) Try a shorter length. ...
  4. 4) Don't skip the base coat. ...
  5. 5) It's all in the application. ...
  6. 6) Seal off the edges. ...
  7. 7) Glitter is a good idea. ...
  8. 8) Work on maintaining it.
Sep 21, 2020

What are the 8 steps to a pedicure? ›

and we promise it's pretty easy to do!
  • Step 1 – Get your tools at the ready. ...
  • Step 2 – Prep your tooties. ...
  • Step 3 – Soak your feet…. ...
  • Step 4 – Scrub your feet, not forgetting your legs. ...
  • Step 5 – Remove dead skin. ...
  • Step 6 – Trim, file and shape nails. ...
  • Step 7 – Moisturise and massage. ...
  • Step 8 – Apply your nail polish.
Apr 15, 2020

What is the process of manicure in a salon? ›

For instance, a manicure frequently involves cuticle care, nail shaping, and polish application. The process is repeated during a pedicure, which also involves soaking the feet, occasionally using stones or foot files to remove dry, dead skin, applying masks, and using foot scrubs to exfoliate.

What is the most important step in a manicure? ›

Your nails should be trimmed to a length that is comfortable for you. If you want square or almond-shaped nails, shape them accordingly. Use water to wash your hands and feet after buffing your nails. In a dry manicure, this step will be skipped since you will be applying a lotion to your hands.

What is the first step in basic manicure? ›

Step 1: Clean your nails with polish remover.

Even if you don't have polish on, you'll still want to run a cotton ball of remover over each nail to get rid of any oils or dirt that could warp your polish. Don't forget to wash your hands with soap and water after.

What are the steps in a basic manicure Milady? ›

  • sanitize hands.
  • remove polish.
  • shape nails.
  • dip in finger bowl& brush debris.
  • push back cuticles.
  • apply cuticle removers.
  • remove cuticles.
  • apply cuticle oil.

What are the 5 basic nail designs? ›

Most clients lean toward one of five basic nail shapes: square, round, oval, squoval, or pointed.

Top Articles
Latest Posts
Article information

Author: Golda Nolan II

Last Updated:

Views: 6129

Rating: 4.8 / 5 (58 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Golda Nolan II

Birthday: 1998-05-14

Address: Suite 369 9754 Roberts Pines, West Benitaburgh, NM 69180-7958

Phone: +522993866487

Job: Sales Executive

Hobby: Worldbuilding, Shopping, Quilting, Cooking, Homebrewing, Leather crafting, Pet

Introduction: My name is Golda Nolan II, I am a thoughtful, clever, cute, jolly, brave, powerful, splendid person who loves writing and wants to share my knowledge and understanding with you.