Laser: Class 3 vs. Class 4—Where Do I Begin - WSAVA 2018 Congress (2024)

Laser: Class 3 vs. Class 4—Where Do I Begin

Janet B. Van Dyke, DVM, DACVSMR

Canine Rehabilitation Institute, Inc. Wellington, FL, USA

Laser therapy, also called photobiomodulation, uses electromagnetic energy to stimulate tissues in the body. Laser is an acronym for light amplification by stimulated emission of radiation, and by definition is collimated and monochromatic. The depth of penetration of laser energy is determined by the wavelength of the light energy. Lasers a classified as Class 1, Class 2, Class 3a, Class 3b, and Class 4. These classes are determined by the milliwatts (mW) of power and were created to describe levels of danger associated with the use of each. Class 1 lasers have less than 0.5 mW of power. A typical example would be a garage door opener or television remote control. Class 2 lasers are between 0.5 and 1.0 mW. Most laser pointers are in this class. Class 3 lasers have between 1 and 500 mW. This group is referred to as therapeutic ‘cold’ lasers and come with ‘eye caution to eye danger’. Class 4 lasers have more than 500 mW and are referred to as ‘hot’ lasers. Surgical and industrial lasers are in this class, which has the precautions of ‘fire hazard and fire danger’. Terminology related to laser usage can be quite confusing. “Low level laser therapy”, “LLLT”, “Cold Laser”, “Class 4 laser therapy”, and “High intensity laser therapy” are often used incorrectly and are generally misleading. It is safer to use the terms photobiomodulation or therapeutic laser or laser therapy.

The physiological effects of laser include accelerated cell division via mitochondrial stimulation, increased leukocyte phagocytosis, stimulation of fibroblasts and collagen stimulation, enhanced synthesis of ATP, and angiogenesis. These effects lead to vasodilation, decreased inflammation, decreased edema, slowed nerve conduction and inhibited peripheral nociception. Indications for laser therapy include wound healing, pain relief (both acute and chronic), muscle spasms (including, perhaps, delayed onset muscle soreness or ‘DOMS’), and edema reduction. Laser is used in pain management practice to speed wound healing and control inflammation. Contraindications include use near the eye, over neoplasia, over open growth plates, pregnant uterus or the thyroid.

Laser application requires attention to probe positioning. The probe must be held perpendicular to the target tissue. The use of contact vs. non-contact techniques is determined by the power of the laser. High powered lasers require a non-contact technique due to the potential for burning tissues. Patients with dark skin will experience discomfort from skin heating so power must be turned down, if possible, or treatment times per area must be shortened. Heat generating lasers can cause pain if staples are in the field of treatment. Use of lasers to treat intraarticular areas of joints requires that the joint be in the open packed position. Laser dosing is measured in units of power being transmitted over time. Energy is measured in Joules. One Joule is the equivalent of one watt delivered for one second. To deliver one Joule of energy from a 500 mW (Class 3) laser, the treatment must be continued for 2 seconds. Most therapeutic regimens used in veterinary practice and clinical trials call for 1 to 8 Joules per square centimeter. This equates to 2 to 16 seconds of therapy time per square centimeter of treatment area. Laser takes considerably less time to use than therapeutic ultrasound where treatment times are often 5 to 20 minutes. The key to dosing is remembering that the depth of penetration is determined by the wavelength of the laser being used. The power does not alter depth of penetration. It affects only the time required to deliver the desired dose. Safety measures for use of lasers are primarily aimed at eye protection. Goggles are laser-specific and have varying optical densities. Sunglasses do not block laser light. In fact, as they cause pupil dilation, sunglasses increase the risk of laser damage to the retina. Patients should wear ‘doggles’ as well. Laser therapy should be done in areas with minimal reflective services to minimize accidental eye injury. Keeping the laser probe in contact with the patient can lower the chances for accidental laser exposure, however, some lasers have the potential to generate heat and could burn tissues if kept in contact with the tissues. Any practice using laser therapy should have a laser safety officer (LSO). The LSO needs to be aware of the nominal hazard zone which is the space in which the level of direct or indirect exposure to laser light could be hazardous. This is 20 feet (6.5 meters) for Class 4 lasers. A “Laser in Use” warning sign must be placed on the door to the treatment area, and ideally, there will be an automatic locking mechanism on the treatment door that prevents accidental entry to the room whenever the laser is in use. Many studies have been published related to laser therapy. One such study looked at wound healing in a rat skin model. This study showed that laser therapy at 4 Joules/cm2 every other day caused decreased inflammation and increased collagen deposition and gave the best results in increasing the burst strength of skin incisions. Another mouse study showed that paw edema could be prevented and treated using laser therapy. A canine clinical study showed wound healing in 3 weeks in what had been a very delayed (7 months) wound closure in a canine limb. Laser therapy reduced the time to ambulation in dogs after hemilaminectomy in one preliminary study. Human studies show significant improvement in pain and flexion measurements in knee osteoarthritis patients. Meta-analyses regarding laser use in tissue healing concluded that “phototherapy is highly effective for tissue repair” and that there is ‘strong support from experimental animal studies’. Meta-analyses regarding laser use for pain relief concluded that “phototherapy relieves pain of various etiologies”.

Laser: Class 3 vs. Class 4—Where Do I Begin - WSAVA 2018 Congress (2024)

FAQs

What is the difference between laser class 3 and class 4? ›

Laser classes

as mentioned, Class 3B lasers deliver up to 500 mW per cm2, while everything above 500 mW is considered Class 4. Lasers in Class 4 are meant for burning, cutting, or evaporative purposes – in the medical field, this usually means surgery, removal of tissue, eye corrections etc.

Who has primary responsibility for laser safety any time a Class 3B or Class 4 laser is operated? ›

ANSI Z136. 1 specifies that any facility using Class 3b or Class 4 lasers or laser systems should designate a Laser Safety Officer to oversee safety for all operational, maintenance, and servicing situations. This person should have the authority and responsibility to monitor and enforce the control of laser hazards.

What is the difference between cold laser therapy and Class 4 laser therapy? ›

The Class IV laser is able to penetrate up to 4 cm and is 24 times more powerful that a cold laser. Since it is able to penetrate so deeply into the body, the vast majority of muscles, ligaments, tendons, joints, and nerves can be treated effectively.

What precautions should be taken during Class 4 laser? ›

Prevent all eye exposure to beams from Class 4 lasers.

This includes accidental exposures -- be careful to keep the beam away from eyes and faces. Also, remember that reflections off mirrors, glass, and shiny surfaces can be just as hazardous as the direct beam.

What is the difference between Level 3 and Level 4 lasers? ›

So, what's the difference between class III and class IV lasers? The most significant difference is their maximum power output. The FDA defines a class IIIb laser as a device with a power output between 5-500mW (0.005-0.5W) and a class IV laser as a device with a power output above 500mW (0.5W).

What is 4 level vs 3 level laser? ›

The four-level laser produce light efficient than the three-level. To achieve the condition of population inversion lower energy is required. The four-level laser is operated in continuous wave mode while the three-level laser is operated in pulse mode.

What is an example of a Class 4 laser? ›

Class IV lasers are high power (c.w. >500mW or pulsed >10J/cm²) devices. Some examples of Class IV laser use are surgery, research, drilling, cutting, welding, and micromachining. The direct beam and diffuse reflections from Class IV lasers are hazardous to the eyes and skin.

How does class 4 laser therapy work? ›

It uses a high-powered laser to penetrate deep into the tissue and stimulate healing at the cellular level. This therapy has been proven to work for chronic pain, arthritis, sports injuries, and even post-surgical recovery. The treatment is quick, with most sessions lasting between 3-7 minutes and no downtime required.

Can a class 4 laser blind you? ›

Hazardous to Eyes and Skin: Class 4 lasers can cause severe eye injuries, including permanent blindness, if direct or reflected laser beams are viewed without appropriate laser safety eyewear. Fire Hazard: Class 4 lasers can ignite flammable materials, posing a fire hazard if not used and handled properly.

Is class 4 laser FDA approved? ›

The Food and Drug Administration (FDA) recognizes four major hazard classes (I to IV) of lasers, including three subclasses (IIa, IIIa, and IIIb). The higher the class, the more powerful the laser and the potential to pose serious danger if used improperly.

What is a class 3 laser for? ›

Class 3 lasers are medium power lasers or laser systems that require control measures to prevent viewing of the direct beam. Control measures emphasize preventing exposure of the eye to the primary or specularly reflected beam.

Are Class 4 laser products safe? ›

laser wavelength and power. Class 4 lasers can damage tissue and skin and so opaque gloves (e.g. latex) must be worn and even so, hands (or fingers etc) should not be placed in the beam path as a method of locating the beam.

How far can a class 4 laser go? ›

Laser Safety Class 4 (Class IV)
ClassClass 4
Sub-classClass 4
Maximum or typical glare distance (FAA 5 μW/cm2, for 1 milliradian beam, 555 nm green light)For a 1 Watt beam: 16,531 ft (3.1 miles) 5,039 m (5 km) For a 10 W beam: 52,275 ft (9.9 miles) 15,933 m (16 km)
23 more rows
Jan 19, 2022

What controls are mandatory for class 4 lasers? ›

A warning light is required for Class 4 lasers if there is no interlock. Laser safety eyewear must be used inside the controlled area as specified in the SOP. Barriers, shrouds, and beam stops are used to limit the NHZ inside the controlled area.

Are class 5 lasers illegal? ›

Let's be super clear: There is no limit on the strongest laser you can legally own in the United States. However, under federal law as governed by the FDA, any laser above 5 mW must comply with FDA/CDRH laser product requirements for labels, safety features, quality control and more.

What is a class 4 laser used for? ›

We use class 4 laser therapy on a range of issues including chronic knee pain or arthritis, chronic Achilles tendonitis, elbow pain or tendonitis in the elbow, and chronic wrist pain. We are able to use the class 4 laser on a wide range of injury sites and extremities to provide relief to our patients.

Is there a class 5 laser? ›

Extreme power

Class 5 Photonics offers ultrafast, high power laser systems and EUV sources for demanding applications from bio-imaging to ultrafast science and attosecond science.

Is a Class 3 laser powerful? ›

Class 3B laser products may have sufficient power to cause an eye injury, both from the direct beam and from reflections. The higher the radiant power of the device the greater the risk of injury. Class 3B laser products are therefore considered hazardous to the eye.

Top Articles
Latest Posts
Article information

Author: Mrs. Angelic Larkin

Last Updated:

Views: 6303

Rating: 4.7 / 5 (47 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Mrs. Angelic Larkin

Birthday: 1992-06-28

Address: Apt. 413 8275 Mueller Overpass, South Magnolia, IA 99527-6023

Phone: +6824704719725

Job: District Real-Estate Facilitator

Hobby: Letterboxing, Vacation, Poi, Homebrewing, Mountain biking, Slacklining, Cabaret

Introduction: My name is Mrs. Angelic Larkin, I am a cute, charming, funny, determined, inexpensive, joyous, cheerful person who loves writing and wants to share my knowledge and understanding with you.